opaque-vx/examples/digital_locker.rs

// Copyright (c) Meta Platforms, Inc. and affiliates.
//
// This source code is dual-licensed under either the MIT license found in the
// LICENSE-MIT file in the root directory of this source tree or the Apache
// License, Version 2.0 found in the LICENSE-APACHE file in the root directory
// of this source tree. You may select, at your option, one of the above-listed
// licenses.

//! Demonstrates an implementation of a server-side secured digital locker using
//! the client's OPAQUE export key, over a command-line interface
//!
//! A client can password-protect a secret message to be stored in a digital
//! locker, controlled by the server. The locker's contents are only revealed to
//! the holder of the password when attempting to open the locker.
//!
//! The client-server interactions are executed in a three-step protocol within
//! the account_registration (for password registration) and account_login (for
//! password login) functions. These steps must be performed in the specific
//! sequence outlined in each of these functions.
//!
//! The CipherSuite trait allows the application to configure the primitives
//! used by OPAQUE, but must be kept consistent across the steps of the
//! protocol.
//!
//! In a more realistic client-server interaction, the client must send messages
//! over "the wire" to the server. These bytes are serialized and explicitly
//! annotated in the below functions.

use std::process::exit;

use chacha20poly1305::aead::{Aead, KeyInit};
use chacha20poly1305::{ChaCha20Poly1305, Key, Nonce};
use generic_array::GenericArray;
use opaque_ke::ciphersuite::CipherSuite;
use opaque_ke::rand::rngs::OsRng;
use opaque_ke::rand::RngCore;
use opaque_ke::{
    ClientLogin, ClientLoginFinishParameters, ClientRegistration,
    ClientRegistrationFinishParameters, CredentialFinalization, CredentialRequest,
    CredentialResponse, RegistrationRequest, RegistrationResponse, RegistrationUpload, ServerLogin,
    ServerLoginParameters, ServerRegistration, ServerRegistrationLen, ServerSetup,
};
use rustyline::error::ReadlineError;
use rustyline::history::DefaultHistory;
use rustyline::Editor;

// The ciphersuite trait allows to specify the underlying primitives that will
// be used in the OPAQUE protocol
#[allow(dead_code)]
struct DefaultCipherSuite;

#[cfg(feature = "ristretto255")]
impl CipherSuite for DefaultCipherSuite {
    type OprfCs = opaque_ke::Ristretto255;
    type KeyExchange = opaque_ke::TripleDh<opaque_ke::Ristretto255, sha2::Sha512>;
    type Ksf = opaque_ke::ksf::Identity;
}

#[cfg(not(feature = "ristretto255"))]
impl CipherSuite for DefaultCipherSuite {
    type OprfCs = p256::NistP256;
    type KeyExchange = opaque_ke::TripleDh<p256::NistP256, sha2::Sha256>;
    type Ksf = opaque_ke::ksf::Identity;
}

struct Locker {
    contents: Vec<u8>,
    password_file: GenericArray<u8, ServerRegistrationLen<DefaultCipherSuite>>,
}

// Given a key and plaintext, produce an AEAD ciphertext along with a nonce
fn encrypt(key: &[u8], plaintext: &[u8]) -> Vec<u8> {
    let cipher = ChaCha20Poly1305::new(Key::from_slice(&key[..32]));

    let mut rng = OsRng;
    let mut nonce_bytes = [0u8; 12];
    rng.fill_bytes(&mut nonce_bytes);
    let nonce = Nonce::from_slice(&nonce_bytes);

    let ciphertext = cipher.encrypt(nonce, plaintext.as_ref()).unwrap();
    [nonce_bytes.to_vec(), ciphertext].concat()
}

// Decrypt using a key and a ciphertext (nonce included) to recover the original
// plaintext
fn decrypt(key: &[u8], ciphertext: &[u8]) -> Vec<u8> {
    let cipher = ChaCha20Poly1305::new(Key::from_slice(&key[..32]));
    cipher
        .decrypt(
            Nonce::from_slice(&ciphertext[..12]),
            ciphertext[12..].as_ref(),
        )
        .unwrap()
}

// Password-based registration and encryption of client secret message between a
// client and server
fn register_locker(
    server_setup: &ServerSetup<DefaultCipherSuite>,
    locker_id: usize,
    password: String,
    secret_message: String,
) -> Locker {
    let mut client_rng = OsRng;
    let client_registration_start_result =
        ClientRegistration::<DefaultCipherSuite>::start(&mut client_rng, password.as_bytes())
            .unwrap();
    let registration_request_bytes = client_registration_start_result.message.serialize();

    // Client sends registration_request_bytes to server
    let server_registration_start_result = ServerRegistration::<DefaultCipherSuite>::start(
        server_setup,
        RegistrationRequest::deserialize(&registration_request_bytes).unwrap(),
        &locker_id.to_be_bytes(),
    )
    .unwrap();
    let registration_response_bytes = server_registration_start_result.message.serialize();

    // Server sends registration_response_bytes to client

    let client_finish_registration_result = client_registration_start_result
        .state
        .finish(
            &mut client_rng,
            password.as_bytes(),
            RegistrationResponse::deserialize(&registration_response_bytes).unwrap(),
            ClientRegistrationFinishParameters::default(),
        )
        .unwrap();
    let message_bytes = client_finish_registration_result.message.serialize();

    // Client encrypts secret message using export key
    let ciphertext = encrypt(
        &client_finish_registration_result.export_key,
        secret_message.as_bytes(),
    );

    // Client sends message_bytes to server

    let password_file = ServerRegistration::finish(
        RegistrationUpload::<DefaultCipherSuite>::deserialize(&message_bytes).unwrap(),
    );

    Locker {
        contents: ciphertext,
        password_file: password_file.serialize(),
    }
}

// Open the contents of a locker with a password between a client and server
fn open_locker(
    server_setup: &ServerSetup<DefaultCipherSuite>,
    locker_id: usize,
    password: String,
    locker: &Locker,
) -> Result<String, String> {
    let mut client_rng = OsRng;
    let client_login_start_result =
        ClientLogin::<DefaultCipherSuite>::start(&mut client_rng, password.as_bytes()).unwrap();
    let credential_request_bytes = client_login_start_result.message.serialize();

    // Client sends credential_request_bytes to server

    let password_file =
        ServerRegistration::<DefaultCipherSuite>::deserialize(&locker.password_file).unwrap();
    let mut server_rng = OsRng;
    let server_login_start_result = ServerLogin::start(
        &mut server_rng,
        server_setup,
        Some(password_file),
        CredentialRequest::deserialize(&credential_request_bytes).unwrap(),
        &locker_id.to_be_bytes(),
        ServerLoginParameters::default(),
    )
    .unwrap();
    let credential_response_bytes = server_login_start_result.message.serialize();

    // Server sends credential_response_bytes to client

    let result = client_login_start_result.state.finish(
        &mut client_rng,
        password.as_bytes(),
        CredentialResponse::deserialize(&credential_response_bytes).unwrap(),
        ClientLoginFinishParameters::default(),
    );

    if result.is_err() {
        // Client-detected login failure
        return Err(String::from("Incorrect password, please try again."));
    }
    let client_login_finish_result = result.unwrap();
    let credential_finalization_bytes = client_login_finish_result.message.serialize();

    // Client sends credential_finalization_bytes to server

    let server_login_finish_result = server_login_start_result
        .state
        .finish(
            CredentialFinalization::deserialize(&credential_finalization_bytes).unwrap(),
            ServerLoginParameters::default(),
        )
        .unwrap();

    // Server sends locker contents, encrypted under the session key, to the client
    let encrypted_locker_contents =
        encrypt(&server_login_finish_result.session_key, &locker.contents);

    // Client decrypts contents of locker, first under the session key, and then
    let plaintext = decrypt(
        &client_login_finish_result.export_key,
        &decrypt(
            &client_login_finish_result.session_key,
            &encrypted_locker_contents,
        ),
    );
    String::from_utf8(plaintext).map_err(|_| String::from("UTF8 error"))
}

fn main() {
    let mut rng = OsRng;
    let server_setup = ServerSetup::<DefaultCipherSuite>::new(&mut rng);

    let mut rl = Editor::<(), _>::new().unwrap();
    let mut registered_lockers: Vec<Locker> = vec![];
    loop {
        display_lockers(&registered_lockers);

        println!("Enter an option (1 or 2):");
        println!("1) Register a locker");
        println!("2) Open a locker\n");
        let readline = rl.readline("> ");
        match readline {
            Ok(line) => {
                if line != "1" && line != "2" {
                    println!("Error: Invalid option (either specify 1 or 2)");
                    continue;
                }
                match line.as_ref() {
                    "1" => {
                        let (password, secret_message) = get_two_strings(
                            "Choose a password",
                            "Set a secret message",
                            &mut rl,
                            None,
                        );
                        let locker_id = registered_lockers.len();
                        registered_lockers.push(register_locker(
                            &server_setup,
                            locker_id,
                            password,
                            secret_message,
                        ));
                        continue;
                    }
                    "2" => {
                        let (locker, password) = get_two_strings(
                            "Choose a locker number",
                            "Enter the password",
                            &mut rl,
                            None,
                        );
                        let locker_index: usize = match locker.parse() {
                            Ok(index) => index,
                            Err(_) => {
                                println!("Error: Could not find locker number");
                                continue;
                            }
                        };

                        if locker_index >= registered_lockers.len() {
                            println!("Error: Could not find locker number");
                            continue;
                        }

                        match open_locker(
                            &server_setup,
                            locker_index,
                            password,
                            &registered_lockers[locker_index],
                        ) {
                            Ok(contents) => {
                                println!("\n\nSuccess! Contents: {contents}\n\n");
                            }
                            Err(err) => {
                                println!("\n\nError encountered, could not open locker: {err}\n\n");
                            }
                        }
                    }
                    _ => exit(0),
                }
            }
            Err(err) => {
                handle_error(err);
                exit(0)
            }
        }
    }
}

// Helper functions

fn display_lockers(lockers: &[Locker]) {
    let mut locker_numbers = vec![];
    for (i, _) in lockers.iter().enumerate() {
        locker_numbers.push(i);
    }

    println!("\nCurrently registered locker numbers: {locker_numbers:?}\n");
}

// Handle readline errors
fn handle_error(err: ReadlineError) {
    match err {
        ReadlineError::Interrupted => {
            println!("CTRL-C");
        }
        ReadlineError::Eof => {
            println!("CTRL-D");
        }
        err => {
            println!("Error: {err:?}");
        }
    }
}

// A function run on the client which extracts two strings from the CLI
fn get_two_strings(
    s1: &str,
    s2: &str,
    rl: &mut Editor<(), DefaultHistory>,
    string1: Option<String>,
) -> (String, String) {
    let query = if string1.is_none() { s1 } else { s2 };
    let readline = rl.readline(&format!("{query}: "));
    match readline {
        Ok(line) => match string1 {
            Some(x) => (x, line),
            None => get_two_strings(s1, s2, rl, Some(line)),
        },
        Err(err) => {
            handle_error(err);
            exit(0)
        }
    }
}